Messed up interlock solutions

pomme

Member
Joined
Jan 1, 2011
Messages
186
Reaction score
1
Location
Florida
Got a Jungle Hunt cab I am working on at the moment. There are 2 interlock switches for power, one on the back door and one on the coin door.

The back door of the cab is chipped out right where it should be hitting the switch and the metal bracket in the coin door that hits the switch up front is broken off.

I am making due temporarily with some duct tape, but it pops off every few days and I don't see that as a real solution.

Does anyone have any creative ways to deal with something like this?
 
Got a Jungle Hunt cab I am working on at the moment. There are 2 interlock switches for power, one on the back door and one on the coin door.

The back door of the cab is chipped out right where it should be hitting the switch and the metal bracket in the coin door that hits the switch up front is broken off.

I am making due temporarily with some duct tape, but it pops off every few days and I don't see that as a real solution.

Does anyone have any creative ways to deal with something like this?

remove them and butt splice the wires together
 
Take one screw out, twist the switch away from the door and pull the knob out a bit. That will bypass the interlock and get it out of the way of the door.

cheers
/Tim
 
Back
Top Bottom