MEI bill acceptor error code

Motoman202

Well-known member

Donor 2021
Joined
Jun 14, 2021
Messages
2,529
Reaction score
2,553
I have a rowe bc-1200 that has an update kit in it to accept newer bills. Has a mei series 2000 bill acceptor that is suddenly giving me a 2 flash error code which says it has been disabled. I have gone through the menu setting on the changer controller and I can't seem to find anything that is askew. Any ideas on this?

20240915_124944.jpg
 
On my bc 25 machines the coin lockout coil would cause that error. Try discontinuing the coil.
 
On my bc 25 machines the coin lockout coil would cause that error. Try discontinuing the coil.
Thanks. However the 1200 doesn't accept coins so no lock out coins
 
This might not be the case but check the dip settings on the bill acceptor itself. One of the dips usually has something along the lines of "always enable" or "machine enable". Maybe try the always enable setting? Just a random thought.
 
This might not be the case but check the dip settings on the bill acceptor itself. One of the dips usually has something along the lines of "always enable" or "machine enable". Maybe try the always enable setting? Just a random thought.
Yeah unfortunately this one does not have an always enable dip. I did try running a programing coupon through it but that made no change.
 
Back
Top Bottom