Mei AL4 series Bill Validator

aviatorskate

New member
Joined
Feb 23, 2011
Messages
5
Reaction score
0
Location
Texas
I want to test a used validator on my workbench using the 9 pin connector. I am using pins 4 and 6 for 110v power. The validator takes the bills in and holds them but does not stack them. The stacker cycles on power up so I know it works. My question is am I missing something? Do I need to use some of the other wires in the connector (5 more).

Thanks
Craig
 
The link that Ken posted shows that there is a hold option in the pulse per dollar setting.
Set dip switch 2,3,&4 on bank 2 to off and try that. It should stack them and trigger 1 pulse
 
Back
Top Bottom