Megatouch Maxx Emerald 2... How to access programming screen?????

Zack5959

New member
Joined
Nov 4, 2010
Messages
457
Reaction score
2
Location
Indiana
Megatouch Maxx Emerald 2... How to access programming screen?????

Just got my Megatouch working after a chassis swap. (thanks megatouch store!)

I had a bad battery on the motherboard which automatically prompted the keyboard to be hooked up and time to be set.
I did that and only that then re-booted the game.

I cant figure out how to get back there! I need to adjust the volume and do a screen calibration.

Anyone have the answer, or know where a .pdf of megatouch manuals reside on the www?

Thanks!
 
there are 2 buttons behind the coin mech part, you need to unlock the coin mech assembly with the key on the lower side of cabinet (if you have key or drill it) then the coin mech part will slide out and there are 2 buttons one for screen calibration, and other is to put it into test mode, I would set up the Six Stars that way you can access volume and screen calibration without removing the coin mech and do it from within the game
 
Back
Top Bottom