Medalist Spectrum Avanti Elite dart board HDD problem

membrane

New member
Joined
May 23, 2013
Messages
5
Reaction score
0
Location
Nevada
Medalist Spectrum Avanti Elite dart board HDD problem

I have a Medalist Spectrum Avanti Elite dart board that has a dead HDD. I have another Avanti Elite board that I took the HDD out and cloned it to put into the dead board.

Problem I have is I get a "Please Contact Administrator" screen while booting the dead board with the cloned HDD.

Anyone know how to solve this problem?

The HDD I did the clone from works perfectly in the dead board if I install it in there.
 
I have a Medalist Spectrum Avanti Elite dart board that has a dead HDD. . . .
Sorry, I'm unable to help as I'm working blind (without machine in front of me) but I am interested in this as well. (so I am leeching onto your thread :))

I too just received a drive from someone who took from one machine to fix a second, The second one worked so he brought me the first drive to inspect/fix. I repaired the drive and cloned it thinking all would be OK and was about to hand it back to him to try. Should I infer from your error message that there could be some protection in place that requires a specific drive matched to the board?
 
You probably need to contact the service department at Medalist:

Medalist Marketing
NetworkSports LLC.
720 South 333rd Suite 102
Federal Way, Wash. 98003
Phone: (253) 939-2900
 
Turns out there are some hard drive serial number checks in place. I am up and running. Does anyone know if there are updates available for this machine?

It looks like I'm running 5.83.1AL
 
Last edited:
They want $90 plus shipping for a drive. Forget it. If anyone has updates,let me know.
 
I'm currently working on the same problem can you send me a copy of your hard drive so I can try and find the difference and change it
 
I don't think I can share the hard drive image. If you know how to find a hard drive serial number on Linux, you'll know where to look.
 
Back
Top Bottom