MCR tron question

wickedbass

Active member
Joined
Nov 15, 2008
Messages
2,586
Reaction score
8
Location
Massachusetts
Hey guys i finally had time to put back together my tron. the board was repaired and working.

i but in the board game came(no sound) on after about 30 seconds the screen went black.
so i also put in my spyhunter board also working and also got nothing.

i have a newly tested working mcr power supply. tested it in a spyhunter cab(not mine). Ps is good. i also checked the +5 and +12 and it looked good.

any suggestions

-Brian
 
Yes...i have neck glow but screen is black..

I would check with the guy who repaired the board. Oh ... wait! ;)
Check the VBATT voltage on the edge connector as well.

So it fired up ok for 30 seconds but after that nothing?
 
Does the game play blind....maybe a monitor issue? You can always hook up the Tron boardset up in your Spy Hunter for testing. All you need to hook up is the bigger power connector...and the video signal connector.

Edward
 
I would check with the guy who repaired the board. Oh ... wait! ;)
Check the VBATT voltage on the edge connector as well.

So it fired up ok for 30 seconds but after that nothing?

Yea when i turned it on from the back of the cab i peeked around the front and saw TRON and a tank in the middle of the screen and on the bottom i saw credit 0.. then about 10 seconds after all that it went black. the monitor has neck glow still, im not sure if it plays blind or not because there is no sound. seems like i might have sound issues also.
any idea on what to check next?
How do i check the VBATT?
 
Back
Top Bottom