dgersic
New member
I'm working on a MCR II power supply here from a Spy Hunter. There is some minor battery damage, but nothing I can't repair. But, looking at the board, there is a part labeled "C205", which I would expect to be a capacitor. The schematics call for a 820pF capacitor here. But what is on the board is an 820 Ohm 1/4 W resistor. This appears to be original, it doesn't look like the board has been worked on previously.
So is the board right, and this is supposed to be a resistor? Or are the schematics right and this should be a capacitor?
Also, right below this is R216. Schematics say it's 82 Ohm, but don't give a wattage rating. It's a big thing, though, not the usual little 1/4 W part. What should this be? I'm thinking 5W or so, just guessing based on its size.
The part number on the front of the board is A082-90412-D000.
So is the board right, and this is supposed to be a resistor? Or are the schematics right and this should be a capacitor?
Also, right below this is R216. Schematics say it's 82 Ohm, but don't give a wattage rating. It's a big thing, though, not the usual little 1/4 W part. What should this be? I'm thinking 5W or so, just guessing based on its size.
The part number on the front of the board is A082-90412-D000.

