Matsushita TM-202

MackAttack

Active member

Donor 4 years: 2014, 2016, 2018, 2024
Joined
Jan 22, 2014
Messages
430
Reaction score
153
I know Matsushita chassis are flaky, but this has more to do with the tube.
I completed a cap kit on a Matsushita TM-202. The red and blue guns look really nice. But I'm missing the green gun. Color transistors are testing fine. I grounded the color pin on the back of the neck board for red and then blue—they filled the screen with red or blue; when I did the same thing with the Green pin it does absolutely nothing. The gun isn't firing.

So, I pulled out my Sencore C70. The book suggested using the Universal Adapter. So I got everything hooked up to run the tests and can't get any movement on the dial for setting up Cutoff. Even when testing the two good guns.

I made a diagram showing what I connected to, do I have the Universal adapter hooked up correctly?
 

Attachments

  • 28308677-D533-4DA7-B94C-0FBFA2453F62.jpeg
    28308677-D533-4DA7-B94C-0FBFA2453F62.jpeg
    189.5 KB · Views: 12
  • IMG_5441.jpeg
    IMG_5441.jpeg
    426.2 KB · Views: 12
Back
Top Bottom