Matsushita TM 202 Issues...

Mikebetz42

Active member
Joined
Aug 26, 2007
Messages
1,301
Reaction score
12
Location
California
Matsushita TM 202 Issues...

Any clue where to start on this issue???

Tube is working fine with another chassis...

Thanks,

-Mike
 

Attachments

  • IMG_4367.jpg
    IMG_4367.jpg
    106.8 KB · Views: 32
  • IMG_4370.jpg
    IMG_4370.jpg
    113.8 KB · Views: 30
  • IMG_4375.jpg
    IMG_4375.jpg
    94.3 KB · Views: 31
There's a big repair thread here somewhere about someone who ALMOST got one of these back from the dead. Some of the info might help you.

Otherwise, start with a cap kit and inspect for cold solder, especially around the flyback and neck socket. Might need a flyback if you can't get something to focus after all of that...
 
Tube looked ok, but dim with another chassis....

I bought this chassis as working, but I am getting this pic....

-Mike
 
Dim = common issue with the tubes on that model of monitor. You may need to rejuvenate it.

On the plus side, they generally take well to a rejuvenation.
 
Back
Top Bottom