matsushita 19" - no red or blue

cadillacman

Well-known member
Joined
Nov 25, 2007
Messages
15,504
Reaction score
542
Location
Roscoe, Illinois
well i have started to dig through my junk salvaged monitors to see whats repairable. WIth the lack of new monitors i figure its time to go through some and have em ready to go..



I have a matsushitatm-202 (lovingly nicknamed the matSHITuba) that only displays green. even with brigntness up green looks kinds weak too.

Ive eyeballed everything ont he chasiss and neckboard for krappy solder etc but nada. Im thinking the tube is krap, tapping on the neck didnt help any..


I figured id test it with the rejuv but of course, my #23 adapter will not fit..


Anybody have this issue? anybody know what adapter ill need to get for my bk470?

thanks fellers.
 
You need the CR30, the CR31 is for 8 pin tubes like the small neck K7000 and most Megatouch monitors. I have a couple home made units that I'd be willing to sell; if you are interested send me a pm.
 
The Matsushita monitors use an oddball tube. You use CR30 adapter on B&K rejuvenators to test or rejuvenate this tube.
 
That's an odd one... I ended up building an adapter using an old neck board, a Molex connector, wire, and pins. A dremel tool came in handy for cutting down the old neckboard and severing traces.
 
Back
Top Bottom