Mario Bros widebody measurements please

Ace20

Active member
Joined
Nov 26, 2004
Messages
470
Reaction score
83
Location
Essex, Chelmsford, United Kingdom (GB & NIR)
I'm restoring a Mario Bros widebody that was in a pretty sorry state, but it's slowly coming together. The part above the back door with the handles was obviously missing or too badly damaged that the last owner made up a new one. They did a pretty good job but they didn't bother adding the small parts below that the back door sits on. I am guessing these are wood but they look pretty thin so I'm not 100% sure. Anyone know exactly? and some measurements so I can recreate them would be very much appreciated. It's not my picture but the two arrows show the parts I am referring to.
 

Attachments

  • mario_back.jpg
    mario_back.jpg
    385.3 KB · Views: 8
I believe this is what you were asking for. The 2 boards that the back door rests on:


1749768299883.png


Wood is 1/2" thick

13/16" of the wood is exposed on the bottom that the door rests on.

I don't have a Metric tape measure. You'll need to convert, sorry :(
 
Last edited:
Back
Top Bottom