Mario Bros. Wide Body

FlavaDave

New member
Joined
Mar 20, 2007
Messages
1,863
Reaction score
4
Location
Texas
Hello, it's been awhile since I've been on here. I was just wondering a few things about MB. Does MB wide-body have a base like other nintendo cabs like DK? What colors are the buttons supposed to be? I have more questions but that's all I can think of right now.

Things needed: Side art - CP overlay
 
Yes, same base type. Also, two Nintendo blue buttons for P1/P2 and two Nintendo orange buttons for Jump 1 and Jump 2.
 
Re:

Thanks for the info. Mine doesn't have a base, so I guess when I get my DK I will copy the base off that, but if anyone could give me some measurements of Mario base that would help me out alot. Thanks.
 
The base should be 3 3/8" tall (3 1/2" is easier as it's a standard board width) 24 3/4" X
25 3/4" the material should be 1" thick. They sell red oak 1" X 3 1/2" boards at Lowes and Home depot. That's what I use. (1) 10 footer will make the entire base with some to spare.
 
The base should be 3 3/8" tall (3 1/2" is easier as it's a standard board width) 24 3/4" X
25 3/4" the material should be 1" thick. They sell red oak 1" X 3 1/2" boards at Lowes and Home depot. That's what I use. (1) 10 footer will make the entire base with some to spare.

Good stuff. I will put this info to good use.
 
Back
Top Bottom