Mandatory updates for U5000 series...5108

Blades

Member
Joined
Aug 4, 2008
Messages
960
Reaction score
5
Location
Nebraska
What is the mandatory updates for a 5108 monitor? Besides the Cap kit.

I thought at one time Ken Layton had said that there were
mandatory Power Supply, Vertical and Horizontal Update kits for this monitor to prevent future problems.

Any Ideas where to get these and what else I should do. As I really don't want this monitor to go bad anytime soon. (Med rez are just a little expensive to replace).

Any help would be appreciated...


;
 
Thanks guys!

Is there any place you can order all in one big kit (or 3 smaller kits) or will I need to go on a big part ordering hunt since WG doesn't service these anymore.

Thanks
 
http://www.wellsgardner.com/products/details.asp?iCat=4&iSubCat=22
Here are two of the three kits that you will need. The third is S04E0000-000F this is a power supply update made for the U2000. Sense the U2000 and U5000 use the same power supple, it works in both. You have to call for this update kit. Costs about $75 for all three. They offer a cap kit. However, you can get it cheaper else where. Shipping was only a little over $10 and recived everything in a few days. There is alot of info on this site for the U5000. Good luck!
 
the best upgrade for a u5000 is the dumpster fitment procedure :D

but seriously, from a guy that had brought a few back to life, do all the upgrades.

if you have ANY issues after let us know because if you run it with issues it will fail again in a short ammount of time
 
Cool, thanks guys. I'll have to give them a call. Hopefully this maintenance will be worth it to keep this monitor going...lol



;
 
Hi

I got hold of a new U5000 monitor. can any one direct me where to find the upgrade kits so that I can do them immediately

R
 
Back
Top Bottom