Makivision monitor issue

LyonsArcade

Well-known member
Joined
Feb 9, 2006
Messages
19,367
Reaction score
3,854
Location
Rock Hill, South Carolina
Hey guys, I have a makivision in a big buck hunter comes up and plays fine but there's gaps in the picture like top and bottom half look great but there's a 2 inch gap in the middle cant be adjusted out there's always a gap somewhere sometimes 2 gaps any ideas?

Thanks!
 
If its Model M3129 or M3125 replace C59 and C55
or all the vertical circuit caps in the area.
If the vertical scan is good,then i would suspect a videocard
in the computer. to test monitor,try hooking up another computer signal to monitor also.
I have seen videocard issues but check the vertical circuit first.
 
Back
Top Bottom