Major Havoc translight marquee plastic glass trim for sides?

CossackWarrior

Well-known member

Donor 6 years: 2012-2013, 2015-2018
Joined
Dec 19, 2012
Messages
10,994
Reaction score
587
Location
Brampton, Ontario, Canada
Major Havoc translight marquee plastic glass trim for sides?

Does anyone know a good source to get the trim that can be cut to size which holds the translight to the glass on a MH and other games?

I am not even sure which size, looking on the net there are many sizes......
 
TOG has U trim. Several sizes -> http://www.thisoldgame.com/products/316-marquee-trim
What's the glass size again for MH?
You should have bought the glass MH marquee. :)

EDIT: MH Marquee glass ->
Marquee: Width 18 5/8 inches
Height: 4 3/8 inches
Tempered clear glass thickness .17 inches, 4.55 mm

>> So 3/16th will work?
 
Last edited:
Ideally, both glass pieces should have U-channel to protect them in the speaker grills ... but not sure of the repro grill tolerances etc. You'd have to measure everything.

I believe the greylite would use 1/4" U?

MH Bezel: Greylite 14 Tempered thickness .22 inches, 5.5 mm
Height: 19 7/8 inches
Width: 18 5/8 inches
 
It's probably the same stuff used to hold pinball translights to the glass. Any pinball suppliers should have it too.
 
Back
Top Bottom