Mad Planets Wico Spinner ball bearing collar

Kid Dynamite

Active member
Joined
Aug 4, 2008
Messages
1,178
Reaction score
14
Location
California
Does anyone know what the replacement ball bearing collar for the Wico spinner from Mad Planets is? One of mine was a little rough, tried to remove it but got stuck on some grime on the way off. Now the bearings appear to be stuck and the spinner takes a lot more torque to rotate (but it is silent now).
 
Post a picture with a ruler next to it, and I'll see if I can find an alternate source.

Many parts used in pinball and arcade games started in other industries (aviation for example).

Make it a color picture please, as big as you can make it.
 
Bearing "collar"? All there is inside those is the shaft on 2 sealed bearings. The bearing type is stamped into the side covers of the bearing. Or you can take a caliper to it and measure the ID/OD and width to find a replacement.
 
Bearing "collar"? All there is inside those is the shaft on 2 sealed bearings. The bearing type is stamped into the side covers of the bearing. Or you can take a caliper to it and measure the ID/OD and width to find a replacement.

Sorry for the improper terminology, it's the first time I've encountered one of those as Mad Planets is the only game I have with a spinner. Now that I know it's just a sealed bearing I should have a much easier time finding a replacement. Thanks.
 
Last edited:
Back
Top Bottom