Mad Planets and more!!!!

TheNickDuong

Well-known member

Donor 5 years: 2019, 2022-2025
Joined
Jun 28, 2018
Messages
767
Reaction score
996
Location
Fresno, California
Ready to start a new restoration! Originally spotted this at an operators warehouse as a 1942 and negotiated a price with a working monitor. The intention was to go Qbert with a Jrok. When we got it out for a closer look, turns out the panel has factory holes for Mad Planets! Fast forward to now and we also have a complete Qbert panel. The plan is to do a full Mad Planets art package, and pin out matching molex connectors for both a Qbert and Mad Planets for swappable controls panels. Should be a fun couple of weeks!

359112177_10227443986384031_1485466796469102649_n.jpgIMG_3633.jpg
 
Last edited:
Progress so far. Everything is wired up. Have both control panels wired to matching molex connectors to swap in and out with the exception of the spinner on its own connector. 12v knocker is wired up and working. New power switch installed up top because the old one was blown. It's currently 110f here this weekend… so all stripping bondo, sanding, painting, of the cabinet and mad planets control panel are going to have to wait!

IMG_3639.jpegIMG_3657.jpeg
 
Taking advantage of this double digit weather this week (still 95f) and got the body work done on the Mad Planets panel and cabinet. All the bondo, sanding, and painting is done! Now we wait on the artwork. Very close to the finish line!

IMG_4044.jpg

IMG_4045.jpg
IMG_4053.jpg

71278033729__60C34759-289C-42D8-8E8F-B4DD5BE775F8.jpg

IMG_4060.jpg
 
Back
Top Bottom