Lunar Lander Marquee Artwork nearly finished

dezbaz

Well-known member

Donor 4 years: 2011, 2013-2014, 2016
Joined
Feb 22, 2008
Messages
8,889
Reaction score
529
Location
Ballajura, Western Australia, Australia
Just about finished the Marquee

Here's a sample (Area below the Space Craft and final details of the craft remaining)

Click to Enlarge


The original is 8 times bigger than the enlarged pic, and 300 DPI
 
Last edited:
looks like from debaz art its the same part#
IMG_6148b.jpg

IMG_6152b.jpg

this is where the Lunar Lander artwork gets a little puzzling
all the LL art is dated 3-79
and includes:
marquee
control panel surface print
control panel subsurface print (for a cpo) but is an intirely different layout
side art which is different than the realsed version and smaller
and a Bezel graphic and its very large! so I dont think the sideart was for a
cabret or anythign small like that.

Im working on trying to put gather and put together some digital versions
of all the art. not that theres interest to run but just interresting.
 
Need to have someone chip in and come up with some replacement boards for LL, with everything that is being reproduced for this game there is already a shortage of boards for people trying to piece together a complete machine.
 
Need to have someone chip in and come up with some replacement boards for LL, with everything that is being reproduced for this game there is already a shortage of boards for people trying to piece together a complete machine.

That would be amazing if someone actually did this.
 
Has this bezel artwork been posted anywhere? (even just a low quality snap so we can get the gist of what it looks like???)

kinda its a 5 color print heres a shot of 2 of those films
listed as Gold and Dark Blue its fairly large aprox 23.5 x 27.75
and dated 10-20-78 matching the dates of the alt. cpo.
any one know anything about this?
or what cab a bezel this size might have fit?

IMG_6159b.jpg

IMG_6160b.jpg

IMG_6162b.jpg
 
kinda its a 5 color print heres a shot of 2 of those films
listed as Gold and Dark Blue its fairly large aprox 23.5 x 27.75
and dated 10-20-78 matching the dates of the alt. cpo.
any one know anything about this?
or what cab a bezel this size might have fit?

Size is

H: 485mm
W: 602mm

It is the exact same size as asteroids upright
 
I sure can use the front,plexi or glass whatever was in there with the artwork/instructions on it
 
Back
Top Bottom