FS Parts: Lots of Vs Nintendo stuff

action53

Well-known member
Joined
May 17, 2016
Messages
1,764
Reaction score
91
Location
West Columbia, South Carolina
Rating - 100%
16   0   0
I was going to put all my Vs stuff into a dkjr cab I got in a trade but I'm going another direction with what games I have room for in the garage. I wanted to get this up early today so I'll edit in pictures in when I get home today.


Fully populated Vs board: $175 shipped SOLD $175 shipped

This has two CPU's installed and I have the loose dummy CPU to go with it. One side has a RP2C04-0001 PPU with no heat sink and roms for Excitebike to run on that PPU, I'll also include a set of Tetris roms for that PPU. The other side has a RP2C04-0004 PPU with Super Mario Bros with the high score save rom, I'll include the original rom for that spot as well.


Vs control panel: $75 plus actual shipping

One stick is longer than the other but they both look to be Nintendo, I don't think the buttons are all Nintendo. Someone cut the plug off the harness. I'd sell just the sticks for $60 shipped

Vs conversion main harness: $50 shipped SOLD for $40 shipped

This is the harness from the Vs conversion kit that Nintendo used to convert early games to Vs

Sanyo EZ20 : $200 plus shipping$250 delivered

Barely noticable burn in, freshly capped and good picture. I'd prefer local pick up but I'd box it up for shipping if you paid for the boxing materials and arranged shipping yourself, I'd bring it to your shipper if need be. I'd also drive it to drop off/meet within 150 miles of Columbia SC for an extra $50

Empty dkjr cab: $100 SOLD

Has black paint over the orange, Missing everything but the power supply, marquee light and coin door. Same delivery deal as the monitor.
 
Last edited:
Here's some pics
 

Attachments

  • tmp_21469-20170821_213047328622018.jpg
    tmp_21469-20170821_213047328622018.jpg
    540.8 KB · Views: 110
  • tmp_21469-20170902_1238541582716015.jpg
    tmp_21469-20170902_1238541582716015.jpg
    570 KB · Views: 89
  • tmp_21469-20170902_1217101519963423.jpg
    tmp_21469-20170902_1217101519963423.jpg
    634.7 KB · Views: 99
Also have a working Galaga bootleg for $50 shipped and a parts k4600 chassis with the flyback/neck board. I capped/reflowed it, it worked perfectly for a week and now it has a horizontal rolling backwards image. The width coil is janky and the xy card is missing a 47uf cap. $40 shipped
 

Attachments

  • tmp_15162-20170903_1117551602612884.jpg
    tmp_15162-20170903_1117551602612884.jpg
    656.5 KB · Views: 59
  • tmp_15162-20170903_1117251477513227.jpg
    tmp_15162-20170903_1117251477513227.jpg
    628 KB · Views: 62
  • tmp_15162-20170903_1117131614275260.jpg
    tmp_15162-20170903_1117131614275260.jpg
    670 KB · Views: 67
Back
Top Bottom