RareHero
Well-known member
Lots of random stuff I can bring to CAX - PCBs, bezels, marquees, cocktail underlays
Hey guys, just cleaning out the closet...I have lots of stuff I'm never gonna use, so let me know if any of this is of interest. I can bring it to California Extreme. Not asking for much...hell, some of the bezels I'll probably just give away.
Cocktail underlays:
-Tron: Original tron underlay, it's a bit wrinkled on both sides near the instructions
-Ms. Pac-Man: Unused Two-bits repro
PCBs:
-Downtown (Romstar) w/ wiring harness for rotational joysticks (worked years ago, if interested I can test it again)
-Motorace USA : No way to test it...it's Irem, so if anyone's got a Moon Patrol I think it's the same pinout
-Bubble Bobble (Taito/Romstar original): This worked, but I dropped something on the ROM in C46 and smashed it...replae that ROM, and it should be good to go.
-Shinobi (Sega): No way to test
-Altered Beast (Sega): No way to test
-Ikari Warriors (SNK): I think this is Ikari! 3-stacked PCB w/ pins for rotational joysticks. No way to test
-Rastan (Taito): I don't think this one works
-Double Dragon (Taito): I had 2 of these at one point...one didn't work, one worked but without sound...not sure which one this is.
Bezels:
-Donkey Kong: Artwork has lots of scratches on it...
-Donkey Kong Jr.: Artwork nice, but some graffiti scratches in the middle
-Q*Bert: Some art flaking, mostly on the right. Graffiti scratches in the middle
-Joust: Light flaking, light scratches
Marquees:
-Mappy: All reds faded...otherwise OK
-Vs. Hogan's Alley (w/ original adhesive)
-Vs. Hogan's Alley -trimmed and attached to plexi
-Vs. Ice Climber (w/ original adhesive)
-Vs. Gumshoe (nice)
-Kicker: Trimmed on the right
-Legend of Kage: Trimmed on all sides but right
-Jungle Hunt (glass): Scratches and pinholes in art
-Mario Bros.: Trimmed
-Rastan: Has instruction card stuck to it
-Bubble Bobble (Romstar version): Some scratches/pinholes...some adhesive crust on the front.
-The Fairlyland Story: This has the shittiest artwork of all time.
-Motorace USA: Scratches/pinholes
-Yie Ar Kung Fu: Trimmed
-Ms. Pac-Man: Reds faded, but otherwise nice
-Rush 'n Attack: Trimmed ont he right, scratches on front.
-Bubble Bobble (generic or Taito?): Trimmed, scratches
-Mr. Do: Conversion decal version stuck to plexi
-Frogger: Faded, a few scratches on the front...otherwise OK
Hey guys, just cleaning out the closet...I have lots of stuff I'm never gonna use, so let me know if any of this is of interest. I can bring it to California Extreme. Not asking for much...hell, some of the bezels I'll probably just give away.
Cocktail underlays:
-Tron: Original tron underlay, it's a bit wrinkled on both sides near the instructions
-Ms. Pac-Man: Unused Two-bits repro
PCBs:
-Downtown (Romstar) w/ wiring harness for rotational joysticks (worked years ago, if interested I can test it again)
-Motorace USA : No way to test it...it's Irem, so if anyone's got a Moon Patrol I think it's the same pinout
-Bubble Bobble (Taito/Romstar original): This worked, but I dropped something on the ROM in C46 and smashed it...replae that ROM, and it should be good to go.
-Shinobi (Sega): No way to test
-Altered Beast (Sega): No way to test
-Ikari Warriors (SNK): I think this is Ikari! 3-stacked PCB w/ pins for rotational joysticks. No way to test
-Rastan (Taito): I don't think this one works
-Double Dragon (Taito): I had 2 of these at one point...one didn't work, one worked but without sound...not sure which one this is.
Bezels:
-Donkey Kong: Artwork has lots of scratches on it...
-Donkey Kong Jr.: Artwork nice, but some graffiti scratches in the middle
-Q*Bert: Some art flaking, mostly on the right. Graffiti scratches in the middle
-Joust: Light flaking, light scratches
Marquees:
-Mappy: All reds faded...otherwise OK
-Vs. Hogan's Alley (w/ original adhesive)
-Vs. Hogan's Alley -trimmed and attached to plexi
-Vs. Ice Climber (w/ original adhesive)
-Vs. Gumshoe (nice)
-Kicker: Trimmed on the right
-Legend of Kage: Trimmed on all sides but right
-Jungle Hunt (glass): Scratches and pinholes in art
-Mario Bros.: Trimmed
-Rastan: Has instruction card stuck to it
-Bubble Bobble (Romstar version): Some scratches/pinholes...some adhesive crust on the front.
-The Fairlyland Story: This has the shittiest artwork of all time.
-Motorace USA: Scratches/pinholes
-Yie Ar Kung Fu: Trimmed
-Ms. Pac-Man: Reds faded, but otherwise nice
-Rush 'n Attack: Trimmed ont he right, scratches on front.
-Bubble Bobble (generic or Taito?): Trimmed, scratches
-Mr. Do: Conversion decal version stuck to plexi
-Frogger: Faded, a few scratches on the front...otherwise OK