FS Parts: LOTS of midway/Bally minis PAC&galaga + nice FOOD FIGHT cab w/ working monitor + mor

theminer49er

Permanently Banned. Thief. More than $10,000 USD s
Joined
Sep 23, 2011
Messages
172
Reaction score
1
Location
hagerstown, Maryland
Rating - 100%
1   0   0
LOTS of midway/Bally minis PAC&galaga + nice FOOD FIGHT cab w/ working monitor + mor

Hello,
I am the Tech at Coinopwarehouse in Hagerstown MD. We just go a load of Midway/Bally minis like 3 pacs one ms pac and a few galagas,plus a few converted pac minis. Not all are complete/working...yet. We also have a real nice Food fight someone converted into a bubble bobble. The board is gone but the monitor works. We also have like 20 pac an ms pac cabs that were converted. I can remove the boards ect and sell just the cabs. We have a lot of Nintendo cabs too! even some dedicated Vs cabs. Ben went back to one of our mother load spots and go more yesterday. They haven't been unloaded yet, but he was trying to get more Vs cabs. There are some pics attached. As always we have tons of other cabs available as well as over 80 working games in stock....REMEMBER we are wholesalers! not retailers. I would be happy to go over things to check them out, but most need love and are not ready to put in a showroom ...a few may be. Anyways... Just PM me for specifics, more pics, or prices. thanks
Chase aka theminer49er

Will have list soon! PM me if you are looking for something in particular ...or come to our warehouse @339 West Antietam St Hagerstown MD 21740
 
Last edited:
I don't know if those pic attached here they are again
 

Attachments

  • DSC00880.jpg
    DSC00880.jpg
    93.7 KB · Views: 302
  • DSC00882.jpg
    DSC00882.jpg
    95.6 KB · Views: 268
  • DSC00883.jpg
    DSC00883.jpg
    91.5 KB · Views: 240
  • DSC00884.jpg
    DSC00884.jpg
    81.1 KB · Views: 231
  • DSC00886.jpg
    DSC00886.jpg
    96.8 KB · Views: 239
Nice looking collection!

Thats nothing We have over 80 working(all I have marked and tested a bit) games and over 70 nonworking at least.... the turnover is nuts we have new stuff all the time at least once a week we get a load of something...we also have hundreds of jukeboxes, kiddie rides,redemption. It is a huge multi floor building warehouse facility.
 
A solid Food Fight cab with a working monitor can be brought back to 100% since Darin makes the art and cpo. If the harness isn't trashed you could potentially make a small amount of money (or at least break even) if you made it new again. Not that anyone would do all that work to break even, but the point is you could build a very nice machine without losing your shirt in the event you had to sell it for some reason. Of course after playing it you'll realize it's not going anywhere :cool:. The point is that someone local needs to buy this and bring it back :D!

Hopefully my art installation goes this quickly :001_sdrool::

 
Where is Lloyd? I miss Lloyd!!

Thats nothing We have over 80 working(all I have marked and tested a bit) games and over 70 nonworking at least.... the turnover is nuts we have new stuff all the time at least once a week we get a load of something...we also have hundreds of jukeboxes, kiddie rides,redemption. It is a huge multi floor building warehouse facility.
 
Where is Lloyd? I miss Lloyd!!

What you don't like me? lol Lloyd is still here. I think he got sick of all the trash talk ...people would come expecting perfect looking & working games...find wholesale games and then trash talk us on the fourms for having "junk". We buy out old operators and unwanted games...not nice collections(well we would if we got a good price). I am doing this ad on my own.
I love this company and could never have been able to afford my collection or learned as much if it wasn't for them. Now I work for them and have the best job in the world!! Sometimes I forget that KLOV is an internet forum and has some "internet people" on it. I have only really used KLOV for info and shopping. I have no desire to talk smack about people and things that are safely across the country or world. It seems some KLOVers are burning bridges for the rest of us...Lloyd & Randy Fromm just said screw it after dealing with us. The mere mention of KLOV to Randy fires him up and I don't blame him after what happened. That stuff tarnishes our name, yet this ad will most likely be taken down because it wasn't labeled properly?! I just wanted to offer people a chance to get at some of our games...and figured restorers would like our cab selection....I know I do! Come visit us!!
 
PRICES:

NINTENDO cabs working are $300 ecept for Super mario Bros and Dr mario which are $350

Minis: we have one dedicated working SUPER MS PAC for $475. The others are $350 for the ones w/o boards and for the converted ones (I will post better pics sun night/mon morning Eastern time) If paid for in advance I can get them in working order for $475. Will go fast...I got a galaga

Pac/ms pac cabs are $200.. $225 with whatever board is in it.

We also have like 40 older empty cabs for $75 bucks and ones with monitors (most likely not working) for $100. Those you would have to come see for your self. Wouldn't be worth the time and money to ID cab, take pics, and post, for a $75 cab

Thanks
 
They have quite a bit of stuff guys and it is like he said, in various different conditions depending on where it came from. Prices are fair, I paid $150 for my converted Black Tiger Cocktail complete with mint Midway coin door which is worth about $75 by itself. Anyone looking for JAMMA cabs to convert to a 19-1 or 60-1, they have tons of good candidates.
Are you going to find mint restored games? No, but they are not trying to represent that side of the market.
 
A solid Food Fight cab with a working monitor can be brought back to 100% since Darin makes the art and cpo. If the harness isn't trashed you could potentially make a small amount of money (or at least break even) if you made it new again. Not that anyone would do all that work to break even, but the point is you could build a very nice machine without losing your shirt in the event you had to sell it for some reason. Of course after playing it you'll realize it's not going anywhere :cool:. The point is that someone local needs to buy this and bring it back :D!

Hopefully my art installation goes this quickly :001_sdrool::


I would love to have the time to do that at work. But I always have like 40 games I need to get working at once and that list is re prioritized every 2 hours. I am making a Golden tee (converted dedicated MK) back into a dedicated MK which is cool. I hardly ever get to do cosmetics at work. I hope it sells fast and for a good price, so Lloyd will be more inclined to do restorations. I am also making a bunch of Donkey kongs that were converted into special forces and pool games(has modded DK boards) back into DKs There are a bunch. Good luck man!!!!!!
 
Man...i really need to buy a house with a basement...Ive been looking in the Hagerstown area too...once I finally decide to pull the trigger, you will be my best friend :)

Ive been to the old warehouse, I was looking for a Ninty cab, and at the time you guys didnt have any :(... now I am out of room lol
 
You don't happen to have any 2p jamma cabs with working vertical monitors, do you? Not after a board, I'm just a failure at monitor repair and need something to drop my Raiden II pcb into, haha.
 
Man...i really need to buy a house with a basement...Ive been looking in the Hagerstown area too...once I finally decide to pull the trigger, you will be my best friend :)

Ive been to the old warehouse, I was looking for a Ninty cab, and at the time you guys didnt have any :(... now I am out of room lol

The game has changed over the past few years. Us early 30 somes now have money and want games we remember playing. For a while they couldn't even sell late 80s early 90s stuff. Now we can, so I have been on them to get more. Hope to be your neighbor soon. There are a few KLOVers around here Sohxhc, superbee, me, and some others. The new warehouse is awesome. Lloyd owns it now too so we will be here a while. Hope to see ya soon
Chase
 
You don't happen to have any 2p jamma cabs with working vertical monitors, do you? Not after a board, I'm just a failure at monitor repair and need something to drop my Raiden II pcb into, haha.

Yes we do!! we have two Ikari Warriors that are in Dynamo cabs but they have board problems. I'm sure we could pull the board and make a deal. The cabs and monitors are in good shape!! I will ask ben what he wants for that and get back to ya!
Chase
 
Back
Top Bottom