Lots of games and parts for sale in Ann Arbor Michigan

Wiz

Well-known member
Joined
Feb 4, 2010
Messages
1,245
Reaction score
43
Location
Ann Arbor, Michigan
Rating - 100%
45   0   0
Lots of games and parts for sale in Ann Arbor Michigan

Selling off some stuff over the holidays. There are a lot of things here and the Michigan guys may recognize some of this as I had it on CL for a bit, but I kept getting flagged down. Feel free to make an offer on items if you don't like the price. My hoarding habits have helped me accumulate too much and I would just like to see this stuff get used by people instead of sitting in my basement.

Fully working games:
Tempest - Fully working. Cabinet is in pretty good shape overall. Sideart is pretty clean, but one side has a 2x3 chunk missing near the control panel. The overlay also has the typical cracking on a couple of the bends of the control panel, but overall this game is in good shape $550

Arkanoid – In a very solid Midway (Pac Man) cabinet. Spinner could use a cleaning but overall decent cab and game $200

Pac Man multi game – Built in a dedicated cabinet (not by me) with full artwork. This game has a 60-1 board installed. Comes with original control panel with buttons added $750

Defender Cocktail multi-game: redone Defender (not by me) cocktail that has a 19-1 board in it. Stargate and Defender do not play as the originals as it has an 8-way joystick so you can switch directions without hitting "reverse". Overall very nice game $725

Bosconian cocktail – very nice and relatively rare Midway cocktail. Very cool game and this little midway cocktail is absolutely gorgeous. $400

Terminator II - Very nice dedicated game with full sideart. All guns are nice and work properly. Voice and sounds are perfect, this is a very nice game that I am having a hard time parting with, but it will never fit in my basement $450

Project games:
Super Sprint- very nice, dedicated cab that I had intended to put in my basement arcade. Cabinet and controls are beautiful and this is the 3 steering wheel version. I just have not had time to look at it and it is taking up space. Currently powers up, but the game does not load, probably has a board issue of some kind- I am thinking RAM. $225 as is.

Big Top Pinball – very cool game made by Wico in 77. Shorter table and not actually coin operated, but still has full stenciled artwork and very nice condition playfield and backglass. Currently lights up, but the ball does not reset into the shooting lane. Probably a minor power issue from what I am told $150 as is.

Additional boards and parts listed below. Prices include shipping. I am in the process of taking pictures of everything, and I will be updating this listing with the photobucket URL in the next day or so. I wasn't sure what to list some of this stuff at, so if you think something is a little off, feel free to make me an offer.

PCB boards (tested working):
Puzz loop Jamma $100
Rastan Jamma $60
Hat Trick Hero kit (Taito) (comes with translate marquee, cardboard bezel, and working PCB) Horizontal Jamma $50
Dyger PCB w/marquee Vertical Jamma $75
Shadow Dancer kit (comes with PCB, cracked marqee, and cardboard bezel) $70

PCB boards (untested):
Redline Racer (Cinematronics- I have no idea if this works or is complete, although it appears to be complete. I have two of these $25 each or both for $45

Artwork (Artwork is in various conditions. Some have a few wrinkles others do not. These have been stored flat since I purchased them. Contact for condition/pics.
Mortal Kombat sideart $40 (not full length, but about 4 feet tall) (I have two sets)
Mortal Kombat II sideart $40 (not full length, but about 4 feet tall)
Mortal Kombat CP/joystick/button overlays $25 for a set of two (I have two sets)
Mechanized Attack sideart $45 (big)
Black Tiger sideart $45
Romstar sideart $30 (one piece) typically seen on Arkanoid
Marvel Super Heroes sideart $30 (one piece)
Tekken sideart $40 (not sure what Tekken this is for)
NBA Jam sideart $30 (one piece)
Qix CPO (Willis) $20
King of Fighters 96 translite marquee(SNK/NEO GEO) $18

Other goodies:
Nintendo SMB Vs case (includes Castlevania art- 5x5 piece, new slanted glass, and new plexi) $45
720 CP (includes wire harness and buttons) $50
720 CP with joystick $150
Star Wars yoke (only 1 trigger currently working, but triggers are cheap from RAM controls, still playable and in nice shape) $125
Star Wars yoke deluxe rebuild kit (Premium-top of line kit) $100
Asteroids Power supply and transformer, pulled from a supposed working game $60
Kung Fu Master control panel (has some CPO missing where hands would rest- still decent) $40
Berzerk CP (only the stainless steel panel itself with artwork on it. Has some scratches and some paint missing here and there, but it is in pretty good shape $50
Warlords cocktail monitor (was told this is working, but I do not have a way to test it. Has some fairly minor Warlords burn, otherwise in good shape) $75 + actual shipping (I have never shipped one so I have no idea how much it will be, but I will only charge the actual amount)
Tempest control panel - currently has an Alcon overlay on it $40

Games are located in Ann Arbor, MI and can be seen most days, so feel free to shoot me PM and set up a time if you want to come out. I also have a bunch of other parts and games, so if you come out and see something else, I may very well sell it as I am buried in parts and games right now. I am also expecting to get about 20-40 more games in the next couple of weeks so check back or shoot me a pm if you want more details.

Thanks,

Zach/Wiz
 
I am also expecting to get about 20-40 more games in the next couple of weeks so check back or shoot me a pm if you want more details.

Thanks,

Zach/Wiz


Has your wife packed her bags yet or are you posting this from the van you live in, down the street, from a laptop connected to a stolen wireless access point?? :p
 
Has your wife packed her bags yet or are you posting this from the van you live in, down the street, from a laptop connected to a stolen wireless access point?? :p

LOL! She is still here and the locks have not been changed yet. We had our son a few weeks ago, so I have been flying under the radar while she had pregger-brain. Often times women that are getting ready to give birth don't think about this kind of stuff and focus on the baby, so I have to admit, I kind of ran with it a bit.

But in all seriousness, I have been in communication with a family that has about 40 games (or did, they have sold a few), and they want to hand them over to me and let me sell them for them. There are some pretty nice ones in there and what I am most interested in are all the parts. The guy had at least a hundred boards and there were some gems in there, not to mention a stack of bezels about four foot high and a slew of control panels. Most of the stuff looked like all the best stuff that an op had that this gent bought about 15 years ago. Not sure about all the particulars quite yet, but they are supposed to be delivering them in the next week or so. I have a pole barn lined up at a fellow collector's place where they will go, and not sure if much will happen with the games till spring given the arctic temps we have, but the parts will be sweet to get my hands on in the meantime.
 
dont do anything with this stuff until i get back into town i will be in miami until the 30th lol hope you score some great games and spread the wealth. oh and congratz on the new baby.
 
I may be interested in some... PM me a list. Also looking for an open oce CP overlay and the NHL orange buttons...
 
Hello guys, sorry for the delay in responding, been busy with holiday stuff. I am working on getting a list of all the games and their conditions. They are stored about 35 minutes from me, so I need to get back over there this week/next week as possible. A few titles I remember are Gravitar, Battlezone, MK I, Wrestlefest, Steel Talons, Rush and Attack, Monaco GP Cockpit (2), Star Rider, Burgertime (Deco cab- rare Japanese version), In the Hunt, and a bunch of others. I will work on some more details as soon as I can.

Thanks,
Wiz
 
Can you post a photo of the berzerk cp?

Sorry for the delay on this pic. I finally got my camera going and have taken some pics of several of the items I had in my listing. Some parts are gone and I have gotten several more games and will be posting a listing pretty soon probably. Here are a few pics of the Berzerk CP. I have never tried to clean it and the dark spots are not visible to the naked eye, or at least mine, so perhaps they can be cleaned up pretty easily.

Link to pics in Photobucket:
http://s965.photobucket.com/albums/ae135/Wizmurder/Arcade games and items for sale/#!cpZZ1QQtppZZ24
 

Attachments

  • Berzerk CP1.jpg
    Berzerk CP1.jpg
    90.5 KB · Views: 6
  • Berzerk CP2.jpg
    Berzerk CP2.jpg
    96.5 KB · Views: 4
  • Berzerk CP back.jpg
    Berzerk CP back.jpg
    93.6 KB · Views: 3
  • Berzerk CPL.jpg
    Berzerk CPL.jpg
    97 KB · Views: 7
  • Berzerk CPR.jpg
    Berzerk CPR.jpg
    97.3 KB · Views: 7
Last edited:
Back
Top Bottom