FS Parts: Lots of controllers, pcbs, and whatnot..

local413

New member

Donor 2011
Joined
Sep 21, 2008
Messages
3,441
Reaction score
34
Location
Longmeadow, Massachusetts
Rating - 100%
113   0   0
Need to clean up my shop for the winter.. Here is what's available, let me know if your interested and I can work with you on price. Shipping isn't included unless specified. I've got tons of parts, this is just what I've put together today.. Have many 19" monitors and chassis with or without new tubes.. Will ship monitors, but they run $75 and up to ship.

B&K 470 Tube Rejuvenator
Works 100%
Has #23 and #31 adapters.. For go7, 4600, 4900, k7000, Sanyo, sharp, etc
All paperwork included
Extra adapters
$125

Pcbs:
Exidy system 440 Crossbow Pcb stack, with CY roms.. Untested but in very nice condition.. Came out of an ops warehouse where everything was pulled working when converted.. SOLD

Namco System 246 box with hardrive, DVD, security dongle (TEFI), and jamma pcb. SOLD

Capcom Classic pinout pcb stack Avengers untested.. Make offer

Crazy Kong pcb stack, working when tested a while back $35

Jamma Capcom Final Fight, tested and working about a month ago SOLD

Namco Super22 MROM pcbs (2), MPM(F16) pcb, and (3) chips, one has AR1 DATAB label the other two arent labeled but stamped C391, AR1 WAVEA
No idea on price, send me an offer or let me know value..

Jamma Combatribes working and looks brand new. $50 or bO

Jamma Capcom Rough Rangers working, $45

T.N.K III untested but nice and clean.. Offers?

Jamma SNK Japanese Guerilla War working SOLD

Jamma Data East Sly Spy working $45 or BO

(2) Scramble pcbs pulled working but haven't tested in a while also have a couple control panels. $45 each pcb and $20 each cp or buy 1 of each and I'll make a deal!

Williams Joust sound and rom pcbs, all working.. $45 for sound and $35 for the rom
Williams Joust and robotron wigit pcbs, working.. $30 each

Control panels:
(2) nice Nintendo vs control panels.. Also have a few (2) monitor vs panels that are cut with a slant.. Some have buttons, some have sticks.. $30 each

Nintendo Mario Bros panel, not wide body.. One orange button has a green top.. Cpo is in decent condition with a little damage on left top side.. Sticks are nice. $45

(2) Scramble one populated one missing stick $25 each

Tempest missing spinner, cpo is pretty nice $35

Centuri Round-up populated with harness nice condition $45

Controls:

(2) Old style tv tennis and other b&w game spinners with pot and connector

Nintendo DK 4-way stick $45

Nintendo old style blue and green button panel $30

(2) Bally Gorf Optos $35

(1) Omega Race spinner $25 (no opto)

(2) Space Firebird cocktail joysticks with nos ball tops. $50

(4) nos midway gun fight sticks (shaft black handle) and other games from this era with mounting plates $25 each

Lots of nos wico 3.5" red ball shafts with spring and actuator..also have orange and purple too.. $12 each

Few nos 3.5" wico micro switch complete sticks in box (red, purple, orange) $25 each

(2) DE rotary controllers with leaf base, these are used but have almost enough parts to make them NOS except for the DE handles.. Have nos yellow balls too..
$65

Nos Berzerk bat handle, just plastic handle that screws onto shaft. $35 Pending payment

Big bag of used 3.5" wico shafts, many different colors.. $35 bag

Also have some nos 4 or 8 way wico leaf bases that can be paired with a frogger, taito, or Sega shaft. These are long, short, skinny red ball shafts..

(2) nos Mad Planets flight stick bases without grommet.. Also works with Mach III.. Has actuator and new leaves. $25 each

(1) nos Tron grommet $40

(2) data east metal base micro switch joys $20

Lots of nos wico micro switch joystick bases without grommets.. Take the whole lot for $30 (20+)

1 or two NOS Atari battlezone joystick bases (2 piece) with nos micro switches $35

(2) NOS Atari BZ or PP joystick bezels $30 for both

(2) NOS Atari "H" plate for shifters $5 each

(1) NOS Atari steering wheel black plastic housing $25

(2) NOS or used Joust cocktail sticks $30 (need to check condition)

Few NOS yellow ball Joust upright sticks $15 each
 
Last edited:
I also have a few sets of NOS rollers and bearings for Wico style trackballs.. These are the larger bearings and smaller rollers with wheel roller.. Not sure if anyone sells these anymore. $25 for a set.

Plus I've got a bag of Atari optos for centipede, millipede, CC, maybe tempest?
$10 each.. Mix of nos and slightly used but will be tested before shipping

Have other 2.5" and 3" Atari and Happ rebuilds, assemblies, optos, and harnesses available..
 
Just tested a Jungle Hunt pcb I forgot about.. Works 100% and I played it for about 20mins.. Sounds are nice and clear.. This is the version with his shirt and hat on.. $65 plus shipping
 
Just found a bag full of NOS Atari Assualt trigger switches..
How about $12 each..

Also have many other nos switches for triggers and controls, let me know what you need..

NOS or Repro large Star Wars yoke sprocket.. $15 each or BO
NOS Star Wars Yoke spring.. $10 each

Have many other nos springs that I'm not sure what they go to.. Will post photos if there is interest.
 
Update

Now it's time to move some complete games.. Shipping is an option, so let me know if your interested in a game or games.. Discounts apply to more than one purchase.

Taito Frontline:
Works 100%
New Atx ps and adapter
New cpo
Nos bezel and marquee
Nos joystick, buttons, and holders
Has manuals
New t-molding
Newer burn free wells monitor

Only issue with this game, decent size chip under the molding next to the coin door. Piece was glued back in, but I wanted to paint match the damaged area.. Haven't yet.. 2.5" long and 1.5" deep.. Can't see it unless your looking from the side of the game. $500 is a pretty firm price.. Unless you buy more than one game..

Taito Stratovox:
Works 100%
Rebuilt chassis
Extra working pcb
Nice cab with full art no water damage
Bezel is near perfect with full art

Marquee is flaking like all of them, have an extra that's better
Cpo has a little wear
Lower coin door is MIA
$275 or BO

Space Invaders
Pcb is dead..
Monitor works well
Cab is nice
Bezel and cpo are also very nice..
Rebuilt ps
$175 or BO

Nintendo Red Tent
Game is complete and comes with (2) CPU pcbs with games
One monitor is perfect with zero burn Sanyo 18"
Second monitor has zero burn but pops fuse Sanyo 18"
Have 2-3 working and rebuilt Sharp 18" chassis (tube is blown)
Extra joysticks
$350 or BO

I've moved a bunch of parts, but still have a ton more.. If there's something you want and the price is to high let me know.. By the way, please stop asking for free shipping.. As I have to pay for packing materials, boxes, and postage.. I'll be more than happy to work on a price, but free shipping isn't going to happen.. As I usually charge the bare minimum and eat packaging costs..

Please PM me your email if you want photos
 
(2) Old style tv tennis and other b&w game spinners with pot and connector

Could you take a picture of these so I can see if they are the same style I have on my machine?
 
Heh, this is somewhat of an old post.. About half the parts have been sold or traded off..

Sold rejuve
Sold all the complete games
Sold most of the pcbs, except Williams ones.
 
Back
Top Bottom