Lot of williams boards

Thomas

Well-known member

Donor 2021
Joined
Jan 23, 2009
Messages
3,726
Reaction score
75
Location
Virginia
Rating - 100%
61   0   0
I will need to pull these out and get some snaps...

I think I have 4 or 5 sets...

non working with power supplies...
 
Here is a shot of the williams boards... I will get some close ups if requested.
 

Attachments

  • DSCN3179.jpg
    DSCN3179.jpg
    98.2 KB · Views: 128
Alright for all the people who have asked... I have been shooting some close ups of all the Williams boards.

I am trying to get everything id so the picture names might not be correct...

I will be adding more pictures as we get them done...

Maybe some of you williams gurus can help me out?


http://mrcade.com/Williams-Boards/
 
I have very decent pictures up of all the boards. I would like to sell them all at once. So 250.00 shipped to the Continental US. Sold as is where is untested.
 
Thanks for that heads up... I was wondering why no numbers above the battery's.
 
Your Robotron MPU board is actually a Bubbles MPU.

So as near as I can tell you have:
1 - D8730 Stargate ROM board (missing 6821 PIA)
1 - D9144 Unpopulated Joust/Robotron ROM board
1 - D9144 Joust ROM board (Green ROMS)
1 - D9144 Joust ROM board (Green ROMS?)
1 - D9144 Robotron ROM board (Red stripe)
1 - R8731.Rev D MPU board
2 - R8570 MPU board (Defender only)
1 - R9663 Bubbles MPU
1 - D8784 Power supply (missing a cap & a heat sink on Q1)
2 - D8784 Power supply (with transistor heat sink)
1 - C8573 Defender IO
2 - C8783 Stargate through Bubbles IO

Which means that you have enough to put together one Stargate or Joust or Robotron and parts of a Bubbles & 2 Defenders.

Right now I don't have the cash to spare for the whole set, but let me know if you decide to break the set up. I would be interested in a couple of those pieces.

ken
 
Thank you Ken... I know that took a little while to do.

Bump it up...
 
which bits are you interested in ken ?
i may be interested in the remainder depending on which bits you wanted...
andy
Your Robotron MPU board is actually a Bubbles MPU.

So as near as I can tell you have:
1 - D8730 Stargate ROM board (missing 6821 PIA)
1 - D9144 Unpopulated Joust/Robotron ROM board
1 - D9144 Joust ROM board (Green ROMS)
1 - D9144 Joust ROM board (Green ROMS?)
1 - D9144 Robotron ROM board (Red stripe)
1 - R8731.Rev D MPU board
2 - R8570 MPU board (Defender only)
1 - R9663 Bubbles MPU
1 - D8784 Power supply (missing a cap & a heat sink on Q1)
2 - D8784 Power supply (with transistor heat sink)
1 - C8573 Defender IO
2 - C8783 Stargate through Bubbles IO

Which means that you have enough to put together one Stargate or Joust or Robotron and parts of a Bubbles & 2 Defenders.

Right now I don't have the cash to spare for the whole set, but let me know if you decide to break the set up. I would be interested in a couple of those pieces.

ken
 
Just a few things:
1 - R9663 Bubbles MPU
1 - R8731.Rev D MPU board
1 - C8783 Stargate through Bubbles IO
1 - D9144 Robotron ROM board

The Robotron ROM board is a nice to have. I have some Joust boards that I could burn a Rob set, but it would be nice to have an actual spare.

ken
 
Back
Top Bottom