Looking for Wms Cyclone Ramps

That ramp is made by Pinball Inc.
http://www.pinballinc.com/ramps/CycloneCometRamp.html
That is the only one that they have reproduced. The others will show up on Epay from time to time at very high prices. Your best bet would be to repair the ones that you have. I have used a multi-purpose plumbers pipe cement by Oatey that was in a red can, then covered the repairs with Mylar on the outside if the crack is minor, or both sides if it is a major crack. The repairs have held up well.
 
That ramp is made by Pinball Inc.
http://www.pinballinc.com/ramps/CycloneCometRamp.html
That is the only one that they have reproduced. The others will show up on Epay from time to time at very high prices. Your best bet would be to repair the ones that you have. I have used a multi-purpose plumbers pipe cement by Oatey that was in a red can, then covered the repairs with Mylar on the outside if the crack is minor, or both sides if it is a major crack. The repairs have held up well.

That is the same one Marco and Bay Area sell. I'll have to wait until it is delivered to verify, but IIRC it was missing all of the ramps except the Comet ramp which unfortunately is badly warped.

ken
 
Back
Top Bottom