Looking for WG 13K K4716 help/advice..

[FlashbackArcade]

Working on a WG 13K 4716 and can't seem to get it to sync with my Crafty TPG. I have tried everything and figured I'd see if anyone has ever come across this before. Picture posted of the best I can get on it. Any ideas/suggestions for me? Have repaired countless monitors over the years and I know I'm just missing something obvious. Any help would be greatly appreciated!

 

[VectorCollector]

Did you try "carefully" adjusting L351 inductor?
And the assumption that you've already done the capkit.

 

[FlashbackArcade]

Yes, it didn't help me get any closer than the image I posted. Thank you for trying to help.

 

[mecha]

Working on a WG 13K 4716 and can't seem to get it to sync with my Crafty TPG. I have tried everything and figured I'd see if anyone has ever come across this before. Picture posted of the best I can get on it. Any ideas/suggestions for me? Have repaired countless monitors over the years and I know I'm just missing something obvious. Any help would be greatly appreciated!

you have the TPG set to standard res, right?

 

[FlashbackArcade]

you have the TPG set to standard res, right?

Yes, I do. Thank you

 

[FlashbackArcade]

Bump of the thread. Anyone have an idea why this monitor is showing multiple images? Is it out of frequency!

 

[mecha]

that actually looks like broken L351

do you have another XY card to try on it? K4600 and K4700 use the same ones as far I know.

 

[FlashbackArcade]

I have tried a few cards but get similar results..

 

[FlashbackArcade]

Recapped chassis and replaced hot/ver card. Monitor back up and running!

 

[mecha]

yeah now that I remember I had that problem with an XY card on K4600 from Zaxxon. Chad @ Arcadecup sent me another XY card and it was good then. in other words the L351 apparently broke somehow.