Museum of the Game® & International Arcade Museum® Forums

I have been working on this Q-Bert and I'm finishing the paint. In the picture here the top portion has been sanded with 320 and the bottom is unsanded after painting yesterday. I'm sanding because the paint did not lay as flat as I would have liked. I've tried three spraying methods and the last coat with a airless sprayer layed it on nice and thick but not glass flat. In your opinion, would you put a light coat on after sanding or would you call it good after sanding. If I use a LVHP I can get a glass like finish but the adjustment band sucks so it will not spray a wide pattern.