Looking for KI1 Instruction Card scan

Broodwich

Well-known member

Donor 6 years: 2012-2013, 2015, 2020, 2023-2024
Joined
Feb 20, 2011
Messages
9,846
Reaction score
420
Location
Albany, New York
I'm trying to hunt down this Instruction card for Killer Instinct 1, I've only ever seen it in this picture (could be custom). If anyone has even a better picture of one that i can use to make my own that would be great!

Thanks!

attachment.php
 

Attachments

  • 1066154369.jpg
    1066154369.jpg
    13.4 KB · Views: 128
I made my own. not the greatest in the world, but I'm proud of the move card I made. lol
 
I made my own. not the greatest in the world, but I'm proud of the move card I made. lol

i saw and downloaded your move card zip and also noticed it had the diagram in it, i might use it but i'm not sure yet. it's good stuff tho :D
 
The KI card in the middle is not custom, I have one of those. The Rare logos in the corners are indeed custom. I'll scan it in and place it in this thread if you want.
 
The KI card in the middle is not custom, I have one of those. The Rare logos in the corners are indeed custom. I'll scan it in and place it in this thread if you want.

if you could do that it would be great thanks! :D
 
picture.php

2qwq7g5.jpg

I'll give a link to a full rez scan once I have it uploaded. The forum pic got resized and dropped in resolution. It's actual size is 12 1/4" x 3" and the right edge got chopped off a bit by my scanner. It also has pushpin holes in it but I'm sure somebody with graphic mod skills can fix the KI logo on the right (it's the same as the left) and blend the holes away.

Looks like I chopped a bit off the top as well. I'll rescan it and post later.
 
Last edited:
picture.php

I'll give a link to a full rez scan once I have it uploaded. The forum pic got resized and dropped in resolution. It's actual size is 12 1/4" x 3" and the right edge got chopped off a bit by my scanner. It also has pushpin holes in it but I'm sure somebody with graphic mod skills can fix the KI logo on the right (it's the same as the left) and blend the holes away.

Looks like I chopped a bit off the top as well. I'll rescan it and post later.

Thanks!!!! i'll start working on it once the one w/o the chopped top comes up :D. i'll upload it to rapidshare when i'm done!
 
Last edited:
Thanks again CMAC!!!!

This is where i'm at with this in just under an hour:

attachment.php


Image is super resized down and lower quality but you get the idea. This should be a good learning experience.
 

Attachments

  • KI (wip)temp.jpg
    KI (wip)temp.jpg
    80.4 KB · Views: 100
Well, Work is still in progress (2 F'n Years), But here's a little glimpse on where I am at:
picture.php


Still gotta fine tune the colors. (THIS IS JUST A SAMPLE)

Please, any feedback is greatly appreciated.
 
Last edited:
Damn water marks...

LOL. I was trying to have fun. I was going to put a smart ass comment that I restore for free for the community.
Like the other thread gone real bad.

Just having fun.
Broodwich thought this little art piece could be useful for the KI fan base.
 
Looks good, much better than another i saw floating around. Glad we could finally put this together.
 
These are now available thanks to our good buddy Biomech011.

They look fantastic!

I'm thinking $16.50 shipped each if anyone is interested. ( http://forums.arcade-museum.com/showthread.php?t=312776 )


(Some of the cost will go back to Biomech011 as thanks for all his hard work for us, as well as I will be making a donation to the forum here as well either as they sell or at the end).
 
Last edited:
Ive been working on one that is closer to the KI2 move bezel:

its further along than whats show, all thats left is uhhhh Thunder and Eyedol

not bad at all, If i wasn't going to put the seizure sticker up top i would probably rock those.




Installed one on my machine today, looks nice and complete.

attachment.php
 

Attachments

  • IMG_2133.jpg
    IMG_2133.jpg
    97.1 KB · Views: 8
  • IMG_2137.jpg
    IMG_2137.jpg
    96.8 KB · Views: 33
It looks really good!

When mine is done I'll send you the links to the files, Im fine with you selling them to help people fix up their KIs. I dont need any $ from it, donate it to the forums or childsplay charity or whatever :)
 
It looks really good!

When mine is done I'll send you the links to the files, Im fine with you selling them to help people fix up their KIs. I dont need any $ from it, donate it to the forums or childsplay charity or whatever :)


I appreciate that. I don't sell other peoples art tho unless I've had a large part in the work on it. My donations from this item here are just because I appreciate all the help from everyone here as well as biomech's hard work.
 
I actually did this several years ago after I got my KI2. was my first time working with Adobe Illustrator. I pulled all the moves and names from the KI Nintendo Power guide. I omitted finishers because I was modeling this after the KI2 card.

attachment.php
 
Last edited:
Back
Top Bottom