Looking for best Sega Hang On/ Super Hang On emulation or FPGA.

mopar5150

Well-known member

Donor 2023, 2025
Joined
Jan 11, 2012
Messages
2,794
Reaction score
3,208
Location
Palm Springs, California
Hey Guys,
I have some Sega arcade motorcycle controls and want to find an emulation or FPGA solution that will work with these.

The steering, throttle and brake are all potentiometers.

Any help would be great.
Thanks,
John
 
Hey Guys,
I have some Sega arcade motorcycle controls and want to find an emulation or FPGA solution that will work with these.

The steering, throttle and brake are all potentiometers.

Any help would be great.
Thanks,
John
Since your controls are all potentiometer-based, they should work with an interface like an A-PAC or an Arduino setup feeding into MAME or another emulator. For FPGA, it's trickier unless you're targeting a specific core that supports analog input. You might want to check out MAME's analog input config it's pretty flexible for throttle and steering setups. What game are you aiming to run?
 
Since your controls are all potentiometer-based, they should work with an interface like an A-PAC or an Arduino setup feeding into MAME or another emulator. For FPGA, it's trickier unless you're targeting a specific core that supports analog input. You might want to check out MAME's analog input config it's pretty flexible for throttle and steering setups. What game are you aiming to run?

I have interface boards, just zero knowledge of working with MAME. Does anybody here offer complete MAME setups?
 
I have interface boards, just zero knowledge of working with MAME. Does anybody here offer complete MAME setups?
Plenty of folks build turnkey MAME setups, but it usually comes down to what hardware you've already got. If you just need someone to configure controls and software, might be easier to post a WTB in the services section.
 
Potential plug n play option...

 
Back
Top Bottom