Looking for a three pin Amp connector for a Taito PSU

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
Rating - 100%
114   0   0
Looking for a three pin Amp connector for a Taito PSU

I need a few of these connectors:

SSL11209.jpg

SSL11211.jpg


They plug into the 120 receptacle on the left side of the original Taito PSU as you face the cab from the rear. Need em quick.
 
Phet, you know how to use a phone? You should call when I didn't PM you :)

I got some 3pos connectors. I'll be sending to you when I send you everything else.

You may want to check Jameco for new ones. That is where I get my molex connectors if other source is out.


Kevin
 
Last edited:
Phet, you know how to use a phone? You should call when I didn't PM you :)

I got some 3pos connectors. I'll be sending to you when I send you everything else.

You may want to check Jameco for new ones. That is where I get my molex connectors if other source is out.


Kevin


I know, but I need them like this week if possible, and I don't have your package ready yet.
 
it may not be this week, but let me group them all together and I'll ship it to you Friday. Is that good? It will be more than what you need. I'm going to send you all that I will never use (I stick to certain types for all games).

Kevin
 
it may not be this week, but let me group them all together and I'll ship it to you Friday. Is that good? It will be more than what you need. I'm going to send you all that I will never use (I stick to certain types for all games).

Kevin

Sweet, I owe you one.
 
Amp part#1-480305-0

And it's mating connector
#1-480303-0 (free hanging)
#1-480304-0 (panel mount) This is what you need...if you need the mate.

Mouser stocks all these.

Edward
 
Amp part#1-480305-0

And it's mating connector
#1-480303-0 (free hanging)
#1-480304-0 (panel mount) This is what you need...if you need the mate.

Mouser stocks all these.

Edward

Reeeeeeeeeaally? Sweet Edward. Mark linked me to the AMP mate and Lock page once, but it confused and frightened me so. This makes it easy! Someone placing a big Mouser order soon? Throw a few of these on there (Amp part#1-480305-0), ship them to me and I'll compensate you for your time and effort.
 
Last edited:
Reeeeeeeeeaally? Sweet Edward. Mark linked me to the AMP mate and Lock page once, but it confused and frightened me so. This makes it easy! Someone placing a big Mouser order soon? Throw a few of these on there (#1-480303-0 (free hanging)), ship them to me and I'll compensate you for your time and effort.

Hey Phet, The one in your hand in the picture is the #1-480305-0.

The other two are what it mates with.....the (panel mount) one will clip into the metal bracket....on the bottom of the cabinet. The (free hanging) one doesn't have the "clips"...so it won't mount into your panel (IE, bracket).

I hope this makes sense.

Edward
 
Hey Phet, The one in your hand in the picture is the #1-480305-0.

The other two are what it mates with.....the (panel mount) one will clip into the metal bracket....on the bottom of the cabinet. The (free hanging) one doesn't have the "clips"...so it won't mount into your panel (IE, bracket).

I hope this makes sense.

Edward

Whoops, thanks Ed, I edited my post to reflect the correction.
 
Thanks to Edward and mouser, I now have 4 of these connectors. Thanks for the help. I can finally truly finish two projects.
 
Back
Top Bottom