Looking for a few parts for a WG4900

bstnguy

Well-known member
Joined
Jan 30, 2008
Messages
1,812
Reaction score
36
Location
Boston, Massachusetts
Been through the whole flowchart, and since I"m getting 160V at the HOT, not much left.

I know I can get these at a few differnet places, but figured I'd see if any fellow KLOVers have these laying around.

Parts for a WG4900:
IC301 - HA11423 aka NTE1471
Q351 - C2482 aka 2SC2482BK aka NTE399
R363 - 3.9Kohm 5W resistor

Thanks
 
Thanks for the info.

I visually checked the 130V line, but might be worth checking it with an ohm meter.

:)
 
Thanks for the info.

I visually checked the 130V line, but might be worth checking it with an ohm meter.

:)

you have to meter the 130v from one end to the other if something is open you wont see it. i take a magnifying glass and good light and check for cracks in the power section, but a meter is a must if you want to get anywhere.
 
Back
Top Bottom