Looking for a couple 8-liner control panels...

modessitt

Volunteer: Encyclopedia Submission Moderator
Joined
Mar 22, 2007
Messages
33,414
Reaction score
325
Location
Austin, Texas
Rating - 100%
24   0   0
Looking for a control panel like the one below. Does not need to have buttons or anything. Let me know what you got (with pics). I'd like a 2 or 3 of them if I can get them. This is so I can keep this one original for when my wife wants to play it, but I can swap some others in for board testing/playing...

Here's the panel:

SDC11998.jpg


Goes with this cabinet:

SDC12000.jpg
 
CPs

Here are the 3 I have right now. The first one pictured is just like yours with a different button layout. The other 2 are for a different style 8 liner cab. If you think they will work, I can see if they will interchange on the cab in the 3rd pic. They are yours for shipping.


100_4790.jpg




100_4791.jpg



100_4792.jpg
 
If you would check that the smaller and larger ones will both fit the cab the same way, I'd appreciate it. Seeing that they are wood(ish), I can fill the holes I don't need. Just want to make sure they'll fit properly...
 
CPs

If you would check that the smaller and larger ones will both fit the cab the same way, I'd appreciate it. Seeing that they are wood(ish), I can fill the holes I don't need. Just want to make sure they'll fit properly...

They both fit the cab with the larger style CP. The mounting is easy to convert. Yours and the smaller one pictured have screws that come up from the bottom. The larger one has carraige bolts that go down through the top. You can fill those holes easier than the button holes. The only difference is the slot for the bezel is about 1/4" different from one to the other. It will move the bezel forward or backward depending what one you use. They are bothe the exact same width and the piece of wood that locates the cp is in the same location on both.
 
Who was it who recently bought a whole warehouse of 8 liners?
I stripped a bunch of them a while back but those parts are long gone now.
 
Who was it who recently bought a whole warehouse of 8 liners?
I stripped a bunch of them a while back but those parts are long gone now.

Yeah, I asked him back then and he was going to see if he had any, but then I never heard anything...
 
They both fit the cab with the larger style CP. The mounting is easy to convert. Yours and the smaller one pictured have screws that come up from the bottom. The larger one has carraige bolts that go down through the top. You can fill those holes easier than the button holes. The only difference is the slot for the bezel is about 1/4" different from one to the other. It will move the bezel forward or backward depending what one you use. They are bothe the exact same width and the piece of wood that locates the cp is in the same location on both.

Yeah, it looks like mine screws into the side wall on each side, so I'd have to figure out how to change it to snaps so I can pop it off pretty easily.

Mine is 23" left to right and 7.5" front to back. The bezel channel is 2" from the back edge....
 
i have the exact one that you have pictured, including the ticket button on the left, 25.00 shipped. sorry i didnt get back sooner but ive been busy moving full games lately

troy
 
Size

Yeah, it looks like mine screws into the side wall on each side, so I'd have to figure out how to change it to snaps so I can pop it off pretty easily.

Mine is 23" left to right and 7.5" front to back. The bezel channel is 2" from the back edge....

I just got a chance to measure. Mine are exactly 23" wide. Just let me know. Aaron
 
Back
Top Bottom