Looking for 6 buttons big blue button template.

Aval0n

Member
Joined
Nov 27, 2012
Messages
304
Reaction score
15
Location
Arizona
I have a big blue with a bionic commando 4 player setup. I am wanting to brave the conversion to a sf style layout. I am going to take on bondoing the holes etc...

I was just wondering if anyone knew of a button template so I make sure they new button holes go in the right place..



Thanks
 
I can't help with the layout, but I have cut dowels to plugged plenty of control panels, then smoothed them with bondo. Not a bad or hard project at all. Good luck to you.
 
So you got yourself a big blue finally. Congrats. Just 2 days earlier and I would of sent you a temp button layout pic that I had found..

I'm sitting right next to my big blue and center to center buttons up and down, left and right, is 1.75'' each.

I'll do a little bit of searching quick and see if I can't find that layout again.

-- edit --

Found an image, so you may be able to resize it to the specifications needed.

http://www.jammaboards.com/guides/Capcom_2P-6B_Template.gif
 
Last edited:
Hey cool.

Thank you very much on both accounts.

Did the big blues use standard happ parts?

Thanks!


So you got yourself a big blue finally. Congrats. Just 2 days earlier and I would of sent you a temp button layout pic that I had found..

I'm sitting right next to my big blue and center to center buttons up and down, left and right, is 1.75'' each.

I'll do a little bit of searching quick and see if I can't find that layout again.

-- edit --

Found an image, so you may be able to resize it to the specifications needed.

http://www.jammaboards.com/guides/Capcom_2P-6B_Template.gif
 
I can't really give you a positive answer on that. All I know is everything in mine is Happ, and that's the way I received it.

Since you have one which is more complete then mine, is that just a cardboard bezel? Also is that tempered glass or plexiglass in front of the monitor? I'm still trying to slowly piece this one back together.
 
I can't really give you a positive answer on that. All I know is everything in mine is Happ, and that's the way I received it.

Since you have one which is more complete then mine, is that just a cardboard bezel? Also is that tempered glass or plexiglass in front of the monitor? I'm still trying to slowly piece this one back together.

There is a black bezel back further and there is currently the wooden frame showing.

I need to get an external bezel to pretty it up.

It is glass.
 
Hey dude I think I have the Plexi still that covered my control panel I took it off because I don't like plexi over my artwork. Anyways Ill make you a template from that and send it with your Marquee ok?

~Chris
 
Here is a great site to go to that has printable control panel button layouts (mostly for fighting games).

http://slagcoin.com/joystick/layout.html

The traditional street fighter setup is the first one and then the rest are more custom stuff.

I've used it before and they work pretty well.

Hope that helps.
 
I think this may be what you are looking for. I cannot take credit for this, but I do not remember where I got it.
CapcomCP_zpsb5842664.jpg


Edit: Although I believe it was over at BYOAC.....
 
Last edited:
Back
Top Bottom