Looking at a Galaga- pics of guts

khabbi

New member
Joined
Feb 9, 2010
Messages
2,058
Reaction score
19
Location
Tampa, Florida
I see a Galaga boardset, and a switchmode power supply wired in. The monitor chassis (the electronics for the monitor) are missing. All that's there is a picture tube and a deflection yoke. It appears to be the WG4600. So, you may be looking for a chassis or a whole monitor.

Beyond that, looks good. Cosmetically it looks great, and that's the hardest thing to fix. Electronics are easy - paint, artwork and woodwork is hard.

-Ian
 
Thanks Ian.. I don't know if this is going to be one I go after or not, I'm not sure I have time for another project.. but it would be nice to have an original galaga! :)
 
The monitor chassis (the electronics for the monitor) are missing. All that's there is a picture tube and a deflection yoke. It appears to be the WG4600. So, you may be looking for a chassis or a whole monitor.

-Ian

Actually, it's a G07. You can see the red, grey, white, brown yoke wires...
 
But you can also see the width coil mounted to the monitor's frame.

EDIT: Looked real close at the picture - what I was thinking was the width coil is just a hole in the metal frame... Also, the dag ground has a plug on it - very G07. Mod, you're right. It's a G07.

-Ian
 
If you want an original Galaga, you're not going to find one in superb original condition like that one, the monitor is a minor issue. The price is right, you should strongly consider this one. That's a nice Galaga.
 
Back
Top Bottom