Museum of the Game® & International Arcade Museum® Forums
This morning I installed a 60 in 1 board with the Lizard Lick Pac-to-Jamma adapter into my Ms. Pac. It was crazy easy and only required me to splice 3 wires into my Player 1 and Player 2 start buttons. Total install time once I figured out which wires was about 10 minutes.
I didn't want to drill holes for new buttons into the original CP, or get a new one, so I wired the two fire buttons into the "Player 1" and "Player 2" start buttons and it works PERFECT!
I am very happy with this set up so far and it was way easy! And, my Ms. Pac is still completely stock inside and I can easily swap the original PCB back in. Sweet!
This is going in storage:
I didn't want to drill holes for new buttons into the original CP, or get a new one, so I wired the two fire buttons into the "Player 1" and "Player 2" start buttons and it works PERFECT!
I am very happy with this set up so far and it was way easy! And, my Ms. Pac is still completely stock inside and I can easily swap the original PCB back in. Sweet!
This is going in storage: