Life Force no sound

bustedstr8

New member
Joined
Dec 30, 2007
Messages
344
Reaction score
3
Location
Stoughton, Massachusetts
I picked up a Life Force that had the wire jumper on the Stereo CN2 header.

After moving it over to the Mono CN3 header there was no sound.

Do I need to close the solder pad jumper JP1 also to get mono sound?



Edit/ Sorted it out, dead buffer in the clock circuit.
 
Last edited:
I picked up a Life Force that had the wire jumper on the Stereo CN2 header.

After moving it over to the Mono CN3 header there was no sound.

Do I need to close the solder pad jumper JP1 also to get mono sound?

In mono mode, the sound output is only on the edge connector. Not at the 4-pin stereo header.
 
Back
Top Bottom