Let's Play, "Name This Part"...

Xerico

New member
Joined
Sep 17, 2011
Messages
138
Reaction score
1
Location
Mineral Wells, Texas
Hi.

Yesterday, I was transporting a 60-n-1 Arcade Classics machine for a buddy. The cabinet was an old Pac-Man Cabinet.

At some time during my transport, the cabinet tipped over and the "art" that sat adjacent to the monitor fell out.

I believe it was two pieces, but it may have been one. The actual picture art and words were on the pieces that were on each side of the monitor.

What is this "art" called? Is it a bezel?

And what can I expect to spend to replace it?

Thanks!

Marcus
 
There are several ways to go to replace the bezel.
(1) Buy a repro from TwoBits. Expect to pay about $200.
(2) Put a WTB here and on the HAAG & Dallas lists. Probably about $30-50 depending on condition and if shipping is involved.
(3) Get two thin pieces of glass or plexi cut and go to an art repro shop like GameOnGrafix and sandwich the art between them. Probably around $70-80.

ken
 
Back
Top Bottom