leaf to microswitch joystick question

BrokeJoker

New member
Joined
Sep 9, 2009
Messages
165
Reaction score
0
Location
Minnesota
ok im replacing the old leaf joystick to a micro switch one i picked up, now the old one only has 2 connections per where as the micro has 3, NC, NO and com, do i just deal with the 2 top slots and not do anyhting with the side com one?
 
You need to connect the ground to the common and the other wire to the NO (normally open). This way when you actuate the switch it completes the circuit.
 
Back
Top Bottom