LCD in Golden Tee 2005?

tinsley

Member
Joined
Mar 28, 2010
Messages
457
Reaction score
1
Location
Connecticut
I have a Golden Tee 2000 I am updating to Golden Tee 2005. The 2000 can has a STD res monitor, where 2005 can use med res. Can I use a LCD for GT 2005? How would I go about doing it?
 
I have heard some people say you can remove the vga jumper cable from the video card and plug a vga monitor directly into the db15 port and get vga out, I have also heard some people say this dose not work. Perhaps it's a green board/red board thing. anyway just try any old vga monitor plugged into the video card and see if it works on your board.
 
I have heard some people say you can remove the vga jumper cable from the video card and plug a vga monitor directly into the db15 port and get vga out, I have also heard some people say this dose not work. Perhaps it's a green board/red board thing. anyway just try any old vga monitor plugged into the video card and see if it works on your board.

I tried doing this with my GT2004 (green board) and it did not work. It could have been the monitor I tried it with though.
 
Back
Top Bottom