SanTe
Well-known member
PayPal sent for one kit.
Thanks!!!
Thanks!!!
Last call for ordering of SW/ESB Kits by 9/17/2011
- Thread starter VectorLabs
- Start date
Vongoosewink
Well-known member
Sent my paypal last night! Thanks Vectorlabs, we're really looking forward to it!
OP
OP
VectorLabs
New member
SW/ESB Kit
Last bump before 12:00 midnight CST cutoff.
Thanks!
Last bump before 12:00 midnight CST cutoff.
Thanks!
khabbi
New member
In before the cutoff! I've been very tight on money or would have committed earlier. Glad I made it though.
SaminVA
Well-known member
OK I figured I better get one for my spare board set wile I can.
Payment sent.
Looking forward to the Multi SEGA sound board next.
Payment sent.
Looking forward to the Multi SEGA sound board next.
DayOff
Active member
Let me know if orders start up again - don't check klov that often and totally missed this...
Samuel-IGN
New member
How's the last batch coming along? When do you think the last of 'em will ship?
Also, did that ESB menu bug get fixed?
Also, did that ESB menu bug get fixed?
SanTe
Well-known member
Yeah, I'm checking in with the same question since it's been three weeks. No rush, really, just curious.
Also, what was the ESB menu bug? I must have missed that.
SanTe
Well-known member
Got a PM reply from VectorLabs. His initial ship time estimate was three weeks from date of order, but he got a ton of orders just before the deadline and said, "It will be another 10 days before I can ship to you. Sorry for the delay."
Just an FYI for anyone in the last batch still waiting on their kit.
Just an FYI for anyone in the last batch still waiting on their kit.
RayWest
Member
I am still waiting on mine, got in a day before the cut off
Samuel-IGN
New member
Just got my kit today, installed it using that awesome YouTube video and...
"The Force will be with you" sounded out... and then...
BLACK SCREEN. If I go to test mode I get a high and low beeping pattern -- of course I don't know if the board test sounds even apply anymore once this kit is installed. I can see that the monitor is on, but hitting buttons only results in "Red 5 standing by" but nothing else.
So some sounds, nothing else.
My machine has been professionally restored and is in top notch shape, I am very frustrated.
Bad kit?
"The Force will be with you" sounded out... and then...
BLACK SCREEN. If I go to test mode I get a high and low beeping pattern -- of course I don't know if the board test sounds even apply anymore once this kit is installed. I can see that the monitor is on, but hitting buttons only results in "Red 5 standing by" but nothing else.
So some sounds, nothing else.
My machine has been professionally restored and is in top notch shape, I am very frustrated.
Bad kit?
doubt it's a bad kit, sounds like a bad sound card. Take a look at the other videos the guy that made the install video has. He has a video dealing with sound issues on the Star Wars boards. I had two sets of Star Wars boards both with issues i followed his fix and now both of mine work.
good luck,
I highly doubt it. I've seen his work and he tests each kit before they ship. He is probably on kit number 100+ by now and I am pretty sure he has the build down. I've seen plenty of "professionally restored" cabinets that are nothing more than a good cleaning and testing. I would bet your sound card has issues and it wouldn't be a bad idea to follow the advice of the above post.
With that being said, there is always the chance a "bad" kit got out. You might want to double check your installation as well. Please report back and let us know what you find.
Best of luck
Ditto, I'll take one on the off-chance these get produced again (or there are extras, for-sales, etc)
LeChuck
khabbi
New member
Just checking to see when the last batch of these will ship? can't wait!!
dirt
Active member
i havent heard anything either but i got the last kit, i ordered after the cutoff and got lucky he had 1 left. so im not complaining about waiting.Just checking to see when the last batch of these will ship? can't wait!!
tyke
New member
I heard from Mike a batch were shipping today
OP
OP
VectorLabs
New member
SW/ESB Kit problem
(Got this message from Sam detailing the resolution to his problem.)
Hey Mike,
I popped the yoke open and figured out what was wrong -- a bit of solder had come loose on the switch. A frustrating coincidence (why now??? haha!), but an easy fix. Late last night I was able to switch to Empire for the first time and it worked perfectly.
The initial problem, I believe, may have been that the vector board was slightly unseated from the edge connector at one end of the board set, but I'm still not 100% positive. Whatever the case, you have been a great help and I truly appreciate the hard work you put into the kit.
Thank you,
-Sam
(Got this message from Sam detailing the resolution to his problem.)
Hey Mike,
I popped the yoke open and figured out what was wrong -- a bit of solder had come loose on the switch. A frustrating coincidence (why now??? haha!), but an easy fix. Late last night I was able to switch to Empire for the first time and it worked perfectly.
The initial problem, I believe, may have been that the vector board was slightly unseated from the edge connector at one end of the board set, but I'm still not 100% positive. Whatever the case, you have been a great help and I truly appreciate the hard work you put into the kit.
Thank you,
-Sam
styhurs
New member
SW/ESB Kit
I know i missed the cut-off, but are there any available?
I know i missed the cut-off, but are there any available?
Similar threads
