Bullwinkle
Member
Hi, I have a ladybug board that boots up to the game, but you can't see the ladybug itself, or the enemies, or the 'fruit" that pops in after the enemies leave their home (even in attract mode).
They were showing about a month ago, not sure exactly what happened to make them disappear. I have since re-capped most of the electrolytic caps and a few of the discs that had visible wear to no avail (other than the picture is now clearer0. I've also repaired the edge connector on the board (had a few "iffy" pads)
I have reseated all eproms and removable chips, no bent pins. Any ideas where to look next?
Thanks in advance
Tom
They were showing about a month ago, not sure exactly what happened to make them disappear. I have since re-capped most of the electrolytic caps and a few of the discs that had visible wear to no avail (other than the picture is now clearer0. I've also repaired the edge connector on the board (had a few "iffy" pads)
I have reseated all eproms and removable chips, no bent pins. Any ideas where to look next?
Thanks in advance
Tom
Last edited: