Kortek K1-2-VOA

awarner

New member
Joined
Mar 6, 2011
Messages
797
Reaction score
11
Location
Atlanta, Georgia
I have a like new but broken Kortek K1-2-VOA that I took the flyback off of because it was squealing and dead. Couldn't find a replacement for it. So now I'm wondering if there are any other chassis that will plug into this tube that has probably 50 hours total on it. The monitor was NIB but unfortunately a Katrina survivor. I'm wondering if that had any influence on it's untimely death (excessive moisture, etc.). Anyway, I'd like to make it a nice spare monitor for when something dies. Any advice would be appreciated.
 
if it's just a flyback Bob Roberts carries them. be prepared to provide the model number from the sticker on the original flyback just in case.
 
Unfortunately, Bob hasn't had any of these Flybacks in years. So, the question still is, what other Chassis will this tube work with?
 
There are several chassis with the K1-2-VO marking, but they are not the same and usually have a separate model number. I've seen at least 3 different cap listings that came from a chassis marked with K1-2-VO...
 
Back
Top Bottom