Konami TMNT Eprom

Shennykenny

Member
Joined
Mar 23, 2010
Messages
63
Reaction score
1
Location
Los Alamitos, California
Does anyone know how to get a hold of 4player Eproms. I have two player Eproms on my board right now. I would like to restore the game into my original Konami 4player cab. Thank you.
 
id actually like to get ahold of the 2 player roms for a simpsons as well if anyone can chime in.
 
I may be willing to do a swap with you. I have a 4 player TMNT (the original one, not the Turtles in Time) and have been looking for a 2 player set of ROMS as I don't want to make one of the huge 4 player control panels.

ken
 
[ **** Warning : Shameless plug below.... **** ]

I can provide 2 or 4 player game conversions eproms
for most Konami games which support this ( Simpsons, TMNT, etc... ).

Most conversions only need 2, 3, or 4 eproms.

Cheers,
Steph
www.Hobbyroms.com
 
What do you suggest Channelmanic? What would surface mount soldering do?

There are a few of us vendors that can supply you with pre-programmed EPROMs. Me, Steph @ Hobbyroms, and Riptor. I'm sure there are others.

I don't know what Steph charges. My charges are for the EPROM plus $3.99 for programming the first chip and $1.99 for each additional chip on the same order.

Surface mount soldering is in my tagline and not the message. If you have a Konami game with graphic corruption then you run about a 33% chance it's a bad ROM, 33% chance it's a gouged trace, 23% chance of a broken solder joint on the surface mount chip connected to the ROM, and about 10% chance of a bad surface mount chip. ;)

RJ
 
Back
Top Bottom