Konami Simpsons Schematic/repair

lostinvt

New member

Donor 2012
Joined
May 6, 2012
Messages
184
Reaction score
1
Location
River Ege, New Jersey
OK, my issue...
I picked up a Konami Simpsons 4 player standup board with a bad chip. I knew it was bad, and I'm a pretty darn good solderer. I think I got everything done correctly, but I want to test each trace, and I think it's a multi-layer PCB, and I can't find the chip in the schematic.
It's chip 9G, and I just can't seem to find it in the schematic PDF.

Unfortunately the game is located a fair distance away so I don't want to hope I didn't break a trace, and I always like to test my work.

Any assistance on either helping find this in a schematic or if you're local, maybe lending a hand?
 
It's a simple 2k x 8bit static RAM so 2016, 2018, 6116 and so on.But keep in mind that the access time must be 45ns or faster as palette circuit requires always precise timing.
 
I have the IC folks..I just am looking to find a schematic that has it on it. I want to make sure all of the traces are good.

So back to the first question..does anyone have a schematic for this game that they can locate IC 9G on?
 
I have the IC folks..I just am looking to find a schematic that has it on it. I want to make sure all of the traces are good.

So back to the first question..does anyone have a schematic for this game that they can locate IC 9G on?

Looks like it is on page 14 of the manual that was posted earlier in the thread. You'll need to look at the board to verify which is which.
 
Back
Top Bottom