Konami Monitor Bezel Help

Cuda

Well-known member
Joined
Jul 25, 2011
Messages
1,410
Reaction score
169
Location
Olathe, Kansas
Ok so I have a Konami 4 player cabinet that was a TMNT but got converted to Cowboys of Moo Mesa. It is missing the plastic monitor bezel. I was told it was available from arcade adventures so I purchased what I was told would fit for a 25" monitor. See attached picture it clearly doesn't. Even if I cut it, it would be short on the sides.
My measurements tell me it should be like 22 1/2" tall and 27" wide.
Can someone tell me if someone is reproducing a bezel that will fit this game? Or if someone has one sitting on a shelf I would be up to buy it. But I am mostly trying to identify what exact bezel it is that I am looking for.
 

Attachments

  • A0125A84-3712-40BB-BBA1-E1DEE25647F6.jpeg
    A0125A84-3712-40BB-BBA1-E1DEE25647F6.jpeg
    2.2 MB · Views: 39
Don't know if this is still unfinished for you, but I wound up with a TMNT 1 cabinet myself and was seeing all these posts about people having a hard time finding a bezel. A little advice.. look for a California Speed bezel and you can trim the sides for a perfect fit
 

Attachments

  • signal-2024-10-04-155400_002.jpeg
    signal-2024-10-04-155400_002.jpeg
    155.3 KB · Views: 24
Don't know if this is still unfinished for you, but I wound up with a TMNT 1 cabinet myself and was seeing all these posts about people having a hard time finding a bezel. A little advice.. look for a California Speed bezel and you can trim the sides for a perfect fit
My apologies for reviving an old thread. But does the glass fit on top of the bezel? I trimmed down a Hydro Thunder bezel recently but it stuck out too much/too tall for the glass to sit on top of it. I'm currently on the hunt for a plastic bezel (Konami or California Speed) for recently acquired Konami cab TMNT 2.
 
Your problem isn't unique, there's basically two 25" bezels, one that is more 'portrait' which fits Midway cabs (think MK2) and the more landscape one that is for Konami. Someone would make a lot of money if they could figure a way to reproduce and ship them affordably. I know from experience that it's really expensive to ship one because of the size, last time it was about $50 just to ship.
 
I found one for my own restoration but the shipping fees are too much to Canada. Maybe this will help you

I appreciate it! Unfortunately i had already purchased a Hydro Thunder bezel from this seller actually. Very helpful guy, the measurements from what we messaged back and forth, identical to the one i have. Not sure if it is a California Speed it might be a Hydro Thunder possibly.

Back to the drawing board i guess. My question is if @Aval0n was able to fit a glass on top of his California Speed bezel. If not then i might have to be patient for a Konami one when it turns up.
 
Your problem isn't unique, there's basically two 25" bezels, one that is more 'portrait' which fits Midway cabs (think MK2) and the more landscape one that is for Konami. Someone would make a lot of money if they could figure a way to reproduce and ship them affordably. I know from experience that it's really expensive to ship one because of the size, last time it was about $50 just to ship.
I see what you mean. The Midway bezels look tall. Probably what the new bezel that @Cuda bought was possibly for.
 
Back
Top Bottom