Konami Cab 3 and 4 coin mechs register as 1 and 2

ArchonTurtle

Member
Joined
Aug 28, 2006
Messages
58
Reaction score
0
Location
South Pasadena, California
Hi there,

I'm finishing off a restoration of a 4 player turtles in time cab. Right now, player 1 and 2 function 100% correctly. However; right now, coin mechs 3 and 4 register as coin mechs 1 and 2 when I put coins in them. Any ideas? Unfortunately I cant test the rest of the 3 and 4 controls because I cant start a game with those players.
 
Did you run the wires from the aux harness to the coin mechs, or the wires from the main harness? It sounds like you just daisy chained the wires from the main harness.
 
I figured it out!

The game was at one point converted into something else (I'm restoring it back). I took for granted that the game had been wired properly during the last conversion.

I was incorrect in that assumption. All 4 doors were indeed wired to the 1 and 2 coin contacts.

At the end of the day, I decided to wire in Micro switch buttons mounted to the underside of the control panel instead of the coin mechs since the game has no free play.
 
Last edited:
Back
Top Bottom