Killer Instinct - CF card not booting

FinalArcade

Member
Joined
May 5, 2022
Messages
63
Reaction score
0
Hey all, I have a KI 1 board that isnt not booting the cf card properly.

At the moment it will boot into its startup bios, but when it goes to load from the card it resets.

Additionally the activity led is always on.

All help is appreciated!
 
Hey all, I have a KI 1 board that isnt not booting the cf card properly.

At the moment it will boot into its startup bios, but when it goes to load from the card it resets.

Additionally the activity led is always on.

All help is appreciated!
did you replace the U98 rom with the Any IDE one? a standard U98 rom will only be able to read from the original Seagate drive.

I could have my failure symptoms wrong here because it's been several years
 
did you replace the U98 rom with the Any IDE one? a standard U98 rom will only be able to read from the original Seagate drive.

I could have my failure symptoms wrong here because it's been several years
Hey, I tried two different versions of the any boot rom, and the standard rom. The one that just has the blue screen and the one that came with my kit.

The standard rom the screen fills blue 80% then hangs for awhile followed by resetting.

The any IDE one that fills blue, fills a bit further and resets immediately.

The any IDE one that came with my kit shows the screen attached, hangs for a few seconds and partially resets.

Additionally I never get a bong sound in any of these roms.
 

Attachments

  • 20250827_203553.jpg
    20250827_203553.jpg
    237.2 KB · Views: 11
Back
Top Bottom