Kick Kicman or any MCRII Bench Testing Tips

bstnguy

Well-known member
Joined
Jan 30, 2008
Messages
1,812
Reaction score
36
Location
Boston, Massachusetts
Trying to fix a Midway Kickman and getting nothing in the machine.

Any advice on how to power it up on the bench?

Thanks
 
There are male headers there, and I believe I have some SCSI cables kicking around. I'll give that a whirl first and update.
 
Cleaned up the pins and put in the SCSI's. (Thanks Mark)

Got 5.12v on the game PS, and a little lower on my Jamma rig. (Fluke giving me "Bad Pwr Supply" error) Getting there!
 
Well, if I can get the right power to it, I can run the Fluke. That'll at least give me some indication on the bus, ROMs and RAM.
 
Got a Jamma fingerboard wired up with all the 5V, 12V and GND. Got the right power to the board and the Fluke runs. Good bus, all 6 game ROMs don't SIG (might be bad). Need to still check the ohter ROMs through the Fluke and see if they check.
 
Back
Top Bottom