kick harness for astro cab help please

safire25

New member
Joined
Feb 20, 2015
Messages
9
Reaction score
0
Location
Melbourne, Australia
Hi guys,

I really need some help here as I am new to this but I have a Jamma 2019 in 1 that was used previously in a table top which had 6 working buttons for both players using the one Jamma harness.

I recently bought one of the new astro city cabs with six buttons per player but when I opened it up only 4 were wired. I want to use all six buttons for SF2 etc but I am very lost to how

I understand I need to get a kick harness? inside the cab I see the extra buttons loom is not connected so I guess I need to buy this and inside the cabinet near the jammer harness is a small white plug which I assume is where the kick harness would connect to the board?

Hopefully I have this right but then my confusion begins, on my Jamma 2019 in 1 I cant see any connection for the kick harness? it did use all six buttons in the tabletop cab so do I just need to wire into the existing loom? if so how please?

If not, how do I get all 6 buttons working? the manual for the 2019 in 1 shows I have some pins near the jamma for buttons 4 and 5 but on my board I cant see this?

The manual also shows the jamma connection layout showing 6 shoot buttons per player

So I have attached all pics to hopefully help. Can someone please show me how I would go about this?

Thankyou so much in advance

Steve
 

Attachments

  • 15007587_1673972206247691_1408152515_o.jpg
    15007587_1673972206247691_1408152515_o.jpg
    133.8 KB · Views: 2
  • 15034317_1673972192914359_822523620_o.jpg
    15034317_1673972192914359_822523620_o.jpg
    198.8 KB · Views: 2
  • 15053387_1673972229581022_737901249_o.jpg
    15053387_1673972229581022_737901249_o.jpg
    222.4 KB · Views: 3
  • 15060368_1673972172914361_866847451_o.jpg
    15060368_1673972172914361_866847451_o.jpg
    202.8 KB · Views: 2
  • 15060473_1673972292914349_964029778_o.jpg
    15060473_1673972292914349_964029778_o.jpg
    204.7 KB · Views: 3
on the side of the jamma board I see this but looks like an IDE plug? is this the kick harness connection?
 

Attachments

  • 15007811_1673972269581018_1230329051_o.jpg
    15007811_1673972269581018_1230329051_o.jpg
    205.6 KB · Views: 2
Back
Top Bottom