KI2 Troubleshooting

mordzy

New member
Joined
May 15, 2010
Messages
55
Reaction score
0
Location
Leeds, West Yorkshire, United Kingdom
Hi Guys,

I have recently acquired a nice KI2 Original. it doesn't work at the moment. - i believe the screen has gone (makes a hissing noise) amongst other things.

I have hooked up the Jamma Board to my KI1 machine and booted it. the disk spins, sounds ok - no clunking noises. i get the sound test tone but then a black screen with a blue bar at the top.

My feeling is that its probably the disk (i get not disk activity LED)

Can anyone suggest any other tests? ill probably be buying a CF Flash kit anyway but didn't know if something else on the board might have gone. there is nothing obviously burnt.
 
You can try to force it into test mode (turn switch 8 of dip switch bank #2 to ON) but you will probably get the same results when powering it on. CF kit will probably fix it.
 
Back
Top Bottom